?HOW CDs WORK
اسلاید 1: HOW CDs WORK ?By Attapon Ashinetongkhum 48057053Paveen Suwannawat 48050215Surawut Suntalodom 48051692Pipat Shutishupibul 48051478Pipatpong Tuntivaranon 48050249
اسلاید 2: Introduction of CDsCDs are everywhere these days. Whether they are used to hold music, data or computer software, they have become the standard medium for distributing large quantities of information in a reliable package.
اسلاید 3: To fit more than 783 megabytes (MB) onto a disc only 4.8 inches (12 cm) in diameter requires that the individual bytes be very small.A CD is a fairly simple piece of plastic, about four one-hundredths (4/100) of an inch (1.2 mm) thick. Most of a CD consists of an injection-molded piece of clear polycarbonate plastic. Understanding the CD: Material
اسلاید 4: Understanding the CD: The Spiral A CD has a single spiral track of data, circling from the inside of the disc to the outside. The fact that the spiral track starts at the center means that the CD can be smaller than 4.8 inches (12 cm) if desired, and in fact there are now plastic baseball cards and business cards that you can put in a CD player.
اسلاید 5: The elongated bumps that make up the track are each 0.5 microns wide, a minimum of 0.83 microns long and 125 nanometers high. (A nanometer is a billionth of a meter.) Looking through the polycarbonate layer at the bumps, they look something like thisUnderstanding the CD: Bumps
اسلاید 6: A drive motor spins the disc. This drive motor is precisely controlled to rotate between 200 and 500 rpm depending on which track is being read. A laser and a lens system focus in on and read the bumps. A tracking mechanism moves the laser assembly so that the lasers beam can follow the spiral track. The tracking system has to be able to move the laser at micron resolutions. CD Player Components
اسلاید 7: What the CD Player Does: Laser Focus Inside the CD player, there i a good bit of computer technology involved in forming the data into understandable data blocks and sending them either to the DAC
اسلاید 8: What the CD Player Does: Tracking The hardest part is keeping the laser beam centered on the data track. This centering is the job of the tracking system. The tracking system, as it plays the CD, has to continually move the laser outward.
اسلاید 9: CD Encoding Issues To understand how data are stored on a CD Because the laser is tracking the spiral of data using the bumps, there cannot be extended gaps where there are no bumps in the data track Because the laser wants to be able to move between songs, data needs to be encoded into the music telling the drive where it is on the disc. Because the laser may misread a bump, there need to be error-correcting codes to handle single-bit errors.
اسلاید 10: “ THANK YOU ”
نقد و بررسی ها
هیچ نظری برای این پاورپوینت نوشته نشده است.