Injection Molding

Injection Molding

اسلاید 1: INJECTION MOLDING

اسلاید 2: 2Injection molding is the most commonly used manufacturing process for the fabrication of plastic parts. A wide variety of products are manufactured using injection molding, which vary greatly in their size, complexity, and application. The injection molding process requires the use of an injection molding machine, raw plastic material, and a mold. The plastic is melted in the injection molding machine and then injected into the mold, where it cools and solidifies into the final part. Introduction

اسلاید 3: 3An injection machine is made up of three primary components – the feed hopper, the screw and the heated barrel. Plastic granules for the part are fed into the heated barrel by a hopper. Injection molding machine sizes can run anywhere from 5 tons of clamping force to over 6000. The higher the tonnage, the larger the machine. In fact, injection molding machines are classified based on tonnage, or more precisely the clamping force or pressure.Injection machine

اسلاید 4: 41.Clamping2.Injection 3.Cooling 4.Ejection Process Cycle