استاندارد

استاندارد

اسلاید 1: سابقه تاریخی واژه استانداردواژه استاندارد در زبان انگلیسی میانه (انگلیسی متداول 1100-1500) به معنی پرچم و علم و کتل بود و این معنی هنوز هم در زبان انگلیسی باقی است و از دو بخش stand به معنی ایستادن و پسوند ard برای ترکیب اسم تشکیل می شود. وعلمدارلشگر راStandard bearer گویند.معادل کلمه استاندارد در زبان فرانسهLa Norm ودر زبان آلمانی Die Norme می باشد.

اسلاید 2: استاندارد مدركي است در برگيرنده قواعد، راهنمايي ها يا ويژگيها براي فعاليت (فعاليتي خاص ) يا نتايج آنها به منظور استفاده عمومي و مكرر كه از طريق همرايي و با نظارت مراجع رسمي تهيه و بوسيله سازمان شناخته شده اي تصويب شده باشد و هدف از آن دستيابي به ميزان مطلوبي از نظم در يك زمينه خاص است ( استاندارد بايد مبتني بر نتايج استوار علوم ، فنون تجربيات و در راه ارتقاء منافع مطلوب جامعه باشد ).

اسلاید 3: سطوح مختلف استاندارداستانداردهای کارخانه ایاستانداردهای ملیاستانداردهای منطقه ایاستانداردهای بین المللی

اسلاید 4: استانداردهای کارخانه ای(شرکتی) عملیات زیر را در برمی گیردکنترل مدیریتروش های اجراییمحیطماشین آلاتطراحینقشه کشیکنترل موادخریدساختبسته بندیفروش و بازاریابیحسابداری

اسلاید 5: استانداردهای ملیISIRIDINBSIANSIAFNOREJIS

اسلاید 6: استانداردهای منطقه ایاستانداردهای اتحادیه اروپا CEN

اسلاید 7: استانداردهای بین المللیISO (International Organization for Standardization)IEC (International Electrotechnical Commission ) ITU (International Telecommunication Union)

اسلاید 8:

اسلاید 9: کشورهای در حال توسعه درISODevelopedcountries32%Developingcountries68%Member bodies104Developedcountries4%Developing countries96%Correspondentmembers43Developing countries100%Subscriber members 10At 10 February 2008157 National Standard body

اسلاید 10: ساختار کمیته های فنی ISO /TC sTCSC SC SC WG WG WG WG WG WG WG WG WG

اسلاید 11: سه نوع عضویت Participating (P) member(open to all member bodies)Observer (O) member (open to all member bodies and correspondent members)Liaison (L) member (various types – open to non-members of ISO)عضویت در کمیته های فنی

اسلاید 12: ISO Deliverables1- ISO/PAS ( publicly Available Specification)2- ISO/TS ( Technical Specification)3- ISO/ TR ( Technical Report)4- ISO/IWA (International Workshop Agreement)5- ISO Guide

اسلاید 13: کمیته های سیاستگزارکمیته سیاستگزار برای مصرف کننده COPOLCOPolicy Committee on Consumer

اسلاید 14: COPOLCOPolicy Committee on Consumer Through its Committee on Consumer Policy, ISO undertakes to: - study how consumers can benefit from standardization - promote consumers input to the development of standards, both nationally and internationally - encourage the exchange of experience on standards work of consumer interest - channel consolidated views from consumers both on current projects and on proposals for new work in areas of interestکمیته های سیاستگزار

اسلاید 15: کمیته سیاستگزار برای ارزیابی انتطباقCASCO Policy Committee on Conformity Assessmentکمیته های سیاستگزار

اسلاید 16: کمیته های سیاستگزارکمیته سیاستگزار برای کشورهای در حال توسعهDEVCOPolicy Commitee on Developing Countries

اسلاید 17: DEVCOCommitee on developing countries policyThe committee has four main objectives:- To identify the needs and requirements of developing countries in the fields of standardization and related activities (i.e. - conformity assessment including accreditation, quality and metrology) and to assist the developing countries, as necessary, in defining these needs and requirements. - Having established these needs and requirements, to recommend actions to assist the developing countries in meeting them. -To monitor the implementation of the ISO Action Plan for developing countries-To provide a forum for the discussion of all aspects of standardization and related activities, and for the exchange of experience among develped and developing countries. کمیته های سیاستگزار

اسلاید 18: فرایند تدوین استاندارد بین المللی 1- NP- New Proposal2- WD- Working Draft3- CD- Committee Draft4- DIS- Draft International Standard5- FDIS- Final Draft International Standard6- IS- International Standard

اسلاید 19: ISO/PAS Publicly Available Specification A normative document representing the consensus within a working group.

اسلاید 20: The way it is done A TC/SC may decide that a particular work item should result in publication of a PAS. Normally this decision should be agreed at the outset, i.e. simultaneously with approval of the New Work Proposal Item (NP). The text is developed through the preparatory stage within a working group. At the end of this stage the text shall be submitted for approval either by correspondence or at a meeting for publication as a PAS. Acceptance of the document requires approval by a simple majority of the P-members of the TC/SC under which the WG operates.

اسلاید 21: ISO/TS Technical specification A normative document representing the technical consensus within an ISO committee

اسلاید 22: The way it is done A TC/SC may decide that a particular work item should result in publication of a technical specification. Normally this decision should be agreed at the outset, i.e. simultaneously with approval of the NP. The text is developed through the preparatory and committee stages at the end of which the text shall be submitted for a three-month vote by the P-members of the committee to approve publication of the document as a technical specification. Acceptance of the document requires approval by two-thirds of the P-members. If the acceptance criterion is satisfied, the document shall be sent to the Central Secretariat for publication as an ISO/TS.

اسلاید 23: ISO/TR Technical report An informative document containing information of a different kind from that normally published in a normative document.

اسلاید 24: The way it is done When a committee has collected information in support of an approved work item or work items, it may decide, by simple majority vote of the P-members, to request that the information be published in the form of a technical report. The ISO Secretary-General, if necessary in consultation with the Technical Management Board, shall decide whether to publish the document as a technical report.

اسلاید 25: International Workshop Agreement (IWA) An IWA is an ISO document produced through workshop meeting (s) and not through the  technical committee process.

اسلاید 26: The way it is done Any interested party can propose an IWA and can participate in developing one.  An ISO member body will be assigned to organize and run the workshop meeting (s) resulting in the IWA.  Market players and other stakeholders directly participate in IWA and do not have to go through a national delegation. An IWA can be produced on any subject. An IWA can be developed swiftly (published in less than 12 months) to address a rapidly emerging market need or public policy requirement. The ISO brand can give international recognition and credibility to your organization’s work. IWAs can be used as precursors to International Standards.

اسلاید 27: ISO Guide Guides provide guidance to technical committees for the preparation of standards, often on broad fields or topics.

اسلاید 28: The way it is done Guides are prepared by Policy Development Committees (PDCs, such as CASCO or COPOLCO), or by committees or groups established by the ISO Technical Management Board (TMB) and operating under the TMB (e.g. REMCO). A number of Guides are jointly developed between ISO and IEC and then published as ISO/IEC Guides.

اسلاید 29: The way it is doneAfter consensus has been obtained in the group preparing the Guide, the draft is disseminated to all ISO member bodies for a four-months enquiry vote as a DIS. A draft Guide is approved if not more than 1/4 of the votes cast by the ISO member bodies are negative. In the case of ISO/IEC Guides, the acceptance criteria has to be met in both organizations independently. If the acceptance criteria are met, the Guide is published without being subject to an additional approval vote as an FDIS.

اسلاید 30: ISO in figures Members163national standards bodies, comprising107member bodies45correspondent members11subscriber members

اسلاید 31:

اسلاید 32:

اسلاید 33:

اسلاید 34:

اسلاید 35:

اسلاید 36:

اسلاید 37:

اسلاید 38:

اسلاید 39:

اسلاید 40: 1 - Generalities, infrastructures and sciences- Generalities / Terminology / Standardization / Documentation (01) - Sociology / Services / Company organization and management / Administration / Transport (03) -Mathematics / Natural sciences (07) -

اسلاید 41: 3 - Engineering Technologies-Metrology and measurement / Physical phenomena (17)- Testing (19) -Mechanical systems and components for general use (21) - Fluid systems and components for general use (23) - Manufacturing engineering (25)- Energy and heat transfer engineering (27) - Electrical engineering (29) - Precision mechanics / Jewellery (39)

اسلاید 42: 4 - Electronics, information technology and telecommunications- Electronics (31) - Telecommunications / Audio and video engineering (33) - Information technology/ Office machines (35)- Image technology (37)

اسلاید 43: 5 - Transport and distribution of goods-Road vehicle engineering (43) -Railway engineering (45) -Shipbuilding and marine structures (47)-Aircraft and space vehicles engineering (49) -Materials handling equipment (53)-Packaging and distribution of goods (55)

اسلاید 44: 6 - Agriculture and food technology -Agriculture (65) -Food technology (67)

اسلاید 45: 7 - Materials technologies -Textile and leather technology (59)-Clothing industry (61) Chemical technology (71) - Mining and minerals (73)- Petroleum and related technologies (75) - Metallurgy (77) -Wood technology (79) -Glass and ceramics industries (81)-Rubber and plastics industries (83) -Paper technology (85)- Paint and colour industries (87)

اسلاید 46: 8 – Construction- Construction materials and building (91) -Civil engineering (93)

اسلاید 47: 9 - Special technologies -Military engineering (95)-Domestic and commercial equipment / Entertainment / Sports (97)

اسلاید 48:

اسلاید 49: با تشکر